Kramer KT-107

Kramer Electronics Ltd.
KT-107, KT-107RB - Defining the KT-107, KT-107RB
4
Defining the KT-107, KT-107RB
This section defines the KT-107 Touch Panel, the tabletop and the on-wall mounts.
KT-107 Touch Panel
This section defines the KT-107.
Figure 1: KT-107 Touch Panel Front and lower side Panel
#
Feature
Function
Hidden Reset Button
Located on top-side. Insert a pin and hold for a few seconds to reset
KT-107.
Light Sensor
Automatically adjusts the screen brightness according to the room
lighting conditions.
Activity RGB LED
Lights green when powered; flashes green when charging the
battery; lights red when camera is on.
Camera
For remote room viewing or video conferencing.
Microphone
For audio communication, recording or conferencing.
Speakers
To output the sound.
Control Button
Touch the Kramer logo area lightly to set the screen to sleep mode
or turn it back on.
Press and hold (for 1 to 2 seconds) to open the pop-up menu which
lets you power down the unit, reboot it or return to the Home-page.
Press twice to activate the camera.
Tabletop Mount Connector (on
the lower side)
For connecting to the tabletop mount (see Mounting the KT-107 on a
Table on page 9).