Kramer TP-121EDID - 7 Your PT-110 EDID XGA; Line Transmitter

Your PT-110EDID XGA / Line Transmitter
17
17
7 Your PT-110EDID XGA / Line Transmitter
The PT-110EDID is an XGA line transmitter that receives an XGA signal
and transmits it over CAT 5 cable to a receiver
1
The PT-110EDID is pre-programmed with default EDID settings with EDID
information ready for the source even before capturing the EDID from the
display. When the PT-110EDID is connected to a display device and the
EDID CAPTURE button is pressed, the PT-110EDID reads and stores the
EDID (Extended Display Identification Data) from the display device. The
display can be disconnected and later reconnected without rebooting the
operating system.
.
In particular, the PT-110EDID:
• Has a transmission range of more than 300ft (more than 100m), and a
20kHz audio bandwidth with an S/N ratio that exceeds 80dB on the same
transmission range
• Can power or be powered by the receiver over the same CAT 5 cable
• Includes H and V Sync polarity switches
• Is 12V DC fed
Figure 9 and Table 9 define the PT-110EDID:
Figure 9: PT-110EDID XGA Line Transmitter
1 For example, the Kramer TP-122 XGA / Audio Line Receiver