Kramer TP-121EDID - 5.1 Connecting the TP-123 EDID XGA; Audio; Data Line Transmitter

Your TP-123EDID XGA / Audio / Data Line Transmitter
9
9
Figure 3 and Table 3 define the TP-123EDID:
Figure 3: TP-123EDID XGA / Audio / Data Line Transmitter
Table 3: TP-123EDID XGA / Audio / Data Line Transmitter Features
#
Feature
Function
1 12V DC +12V DC connector for powering the unit
2 AUDIO IN 3.5mm mini jack Connects to the audio source
3 RS-232 terminal block connector Connects to the PC or the Remote Controller (see section 5.2)
4 LINE OUT RJ-45 connector
Connects to
1
5
the LINE IN RJ-45 connector on the TP-124 XGA
/ Audio Line Receiver
XGA IN 15-pin HD (F) connector Connect to the XGA source
6 EDID
2
CAPTURE Button Press to acquire the EDID information from the display
STATUS LED Illuminates during normal operation; blinks when acquiring the
EDID
ON LED Illuminates when receiving power
5.1 Connecting the TP-123EDID XGA / Audio / Data Line Transmitter
You can use the TP-123EDID XGA / Audio / Data Line Transmitter together
with the TP-124 XGA / Audio / Data Line Receiver
3
Before connecting the transmitter and receiver system you can acquire the
EDID from the display or set the system to the default EDID, see section
to configure a twisted
pair transmitter and receiver system, to transmit the video, audio and RS-232
control signals via CAT 5 cable.
9.
1 Using a CAT 5 cable with RJ-45 connectors at both ends (the PINOUT is defined in Table 11 and Figure 11)
2 See section
9
3 Download up-to-date Kramer user manuals from our Web site at http://www.kramerelectronics.com