Kramer TP-789Rxr

Kramer Electronics Ltd.
WP-789T, TP-789R, TP-789Rxr – Mounting
7
Mounting WP-789T
Before mounting, connect the HDBaseT cable and power
To mount WP-789T:
Insert the device into the in-wall box and connect the parts as shown in the illustrations below:
EU/UK Version
US-D Version
DECORA® design frames are included in US-D models.
We recommend that you use any of the following standard 1 Gang in-wall junction boxes (or
their equivalent):
• US-D: 1 Gang US electrical junction boxes.
• EU: 1 Gang in-wall junction box, with a cut-hole diameter of 68mm and depth that can fit
in both the device and the connected cables (DIN 49073).
• UK: 1 Gang in-wall junction box, 75x75mm (W, H) and depth that can fit in both the
device and the connected cables (BS 4662 or BS EN 60670-1 used with supplied
spacers and screws).