Kramer TP-789Rxr

Kramer Electronics Ltd.
WP-789T, TP-789R, TP-789Rxr – Mounting
6
Mounting
This section provides instructions for mounting WP-789T, TP-789R, TP-789Rxr. Before
installing, verify that the environment is within the recommended range:
• Operation temperature – 0 to 40C (32 to 104F).
• Storage temperature – -40 to +70C (-40 to +158F).
• Humidity – 10% to 90%, RHL non-condensing.
• WP-789T, TP-789R, TP-789Rxr must be placed upright in the correct horizontal
position.
Warning:
• Ensure that the environment (e.g., maximum ambient temperature & air flow) is
compatible for the device.
• Avoid uneven mechanical loading.
• Appropriate consideration of equipment nameplate ratings should be used for avoiding
overloading of the circuits.
• Reliable earthing of rack-mounted equipment should be maintained.
Mounting TP-789R, TP-789Rxr
Mount device before connecting any cables or power.
To mount TP-789R, TP-789Rxr in a rack:
Mount the unit in a rack using the recommended rack adapter
(see www.kramerav.com/product/TP-789Rxr)
To mount the TP-789R, TP-789Rxr on a table or shelf:
• Attach the rubber feet and place the unit on a flat surface.
• Fasten a bracket (included) on each side of the unit and attach it to
a flat surface.
For more information go to www.kramerav.com/downloads/TP-789Rxr