Kramer TP-789Rxr

Kramer Electronics Ltd.
WP-789T, TP-789R, TP-789Rxr – Defining WP-789T, TP-789R, TP-789Rxr HDMI Line Transmitters and
Receivers over HDBaseT
4
Defining WP-789T, TP-789R,
TP-789Rxr HDMI Line
Transmitters and Receivers over
HDBaseT
This section defines WP-789T, TP-789R, TP-789Rxr.
Figure 1: WP-789T
#
Feature
Function
HDMI™ IN Connector
Connects to an HDMI source.
STATUS LED
Color
HDBaseT
Connected
Source Detected
Acceptor Detected
Blue
Yes
Yes
Yes
Green
Yes
Yes
No
Yellow
Yes
No
N/A
White
Device is powered with no detected connections.
STATUS LED is off only when the device does not receive power.
RS-232 (G, Rx, Tx, PROG)
4-pin Terminal Block
Connect to an RS-232 port for serial link extension to a receiver.
IR (Rx, Tx-1, Tx-2), 3-pin
Terminal Blocks
Connect to an external IR infrared emitter or controller IR port.
Ring Tongue Terminal
Grounding Screw
Connect to grounding wire (optional).
HDBT OUT RJ-45 Connector
Connect to the HDBT IN connector on a receiver (for example, TP-
789R).
Power Supply 2-pin Terminal
Block Connector
Connect to a power supply (if required). Connect GND to GND, +12V
to +12V.
1
2
3
4
5
6
7