Configuring Audio
VP-475UX enables you to configure how the SDI audio is handled by the system. You can
select which of the SDI audio channels to de-embed for output to the HDMI and XLR audio
outputs and define the output format for the XLR connectors. One selected pair of SDI
channels is output through the HDMI output and, when configured as analog, through the XLR
outputs. When the XLR outputs are configured as AES/EBU, both pairs of the selected group
are output.
To configure the audio:
1. Click AV Configuration from the Navigation Pane.
The AV Configuration page appears.
2. Click HDMI Output 1 tab or HDMI Output 2 tab.
3. Under Audio - Source, select 1 of the 8 pairs of audio signals by selecting the Group
number (1-4) and Pair number (1, 2).
4. Under Audio - Output Format, Click Analog or AES.
The audio is configured.
To Next Page
Loading...
Need help?
General
