Selecting Resolution
To select the resolution:
1. In the Navigation pane, click Device Settings. The Device Settings page appears.
Figure 22: Output Settings Page
2. Open the drop-down box next to Resolution to select the output resolution.
Output resolution is selected.
Setting Image Size on the Display
To set the image size:
1. In the Navigation pane, click Output Settings. The Device Settings page appears.
2. Open the drop-down box next to Size to set the image size.
Setting Bypass Mode
To set bypass mode:
1. In the Navigation pane, click Output Settings. The Device Settings page appears.
2. Open the drop-down box next to Bypass to set the bypass mode to:
▪ On – Process the HDMI signal via the scaler.
▪ Off – No video processing (scaler is bypassed).
To Next Page
Loading...
