Kramer VS-44H

KRAMER: SIMPLE CREATIVE TECHNOLOGY
Technical Specifications
16
7.6.2 Connecting the ETHERNET Port via a Network Hub (Straight-Through
Cable)
You can connect the Ethernet port of the VS-44H to the Ethernet port on a
network hub or network router, via a straight-through cable with RJ-45
connectors.
7.6.3 Control Configuration via the Ethernet Port
To control several units via the Ethernet, connect the Master unit
(Machine # 1) via the Ethernet port to the LAN port of your PC. Use your
PC initially to configure the settings (see section
7.5).
8 Technical Specifications
The VS-44H technical specifications are shown in Table 2:
Table 2: VS-44H Technical Specifications
1
INPUTS: 4 HDMI connectors
OUTPUTS: 4 HDMI connectors
BANDWIDTH: Supports up to 1.65Gbps bandwidth per graphic channel
COMPLIANCE WITH
HDMI STANDARD:
Supports HDMI and HDCP
MAX RESOLUTION: Up to UXGA; 1080p, 1920x1200
POWER SOURCE:
100−240V AC; 50/60Hz, 28VA
CONTROLS: Front panel buttons, infrared remote control transmitter, RS-232, Ethernet
DIMENSIONS: 19" x 7" x 1U W, D, H
WEIGHT: 2.5kg (5.5lbs) approx.
ACCESSORIES: Power cord, rack “ears”, IR remote control
OPTIONS: Kramer HDMI cables
2
1 Specifications are subject to change without notice
2 For best results, use Kramer cables such as the C-HM/HM series, the C-HM/DM series and/or our HDMI over fiber optics
C-FOHM/FOHM series