Contents
1 Introduction 1
2 Getting Started 1
2.1 Quick Start 2
3 Overview 3
3.1 Defining the EDID 3
3.2 About HDMI 4
3.3 About HDCP 5
3.4 Recommendations for Best Performance 5
4 Your VS-44H 4 x 4 HDMI Matrix Switcher 5
5 Installing the VS-44H in a Rack 8
6 Connecting the VS-44H 4 x 4 HDMI Matrix Switcher 9
7 Operating the VS-44H 4 x 4 HDMI Matrix Switcher 10
7.1 Routing Inputs to Outputs 11
7.2 Disconnecting the Outputs 11
7.3 Storing and Recalling a Setting 11
7.4 Acquiring the EDID 12
7.4.1 Acquiring an EDID from a Single Connected Output 12
7.4.2 Acquiring an EDID from Several Sets of Inputs and Outputs 12
7.4.3 Acquiring an EDID from Several Connected Outputs Automatically 13
7.4.4 Acquiring the Default EDID 14
7.5 Connecting to VS-44H via RS-232 14
7.6 Controlling via ETHERNET 14
7.6.1 Connecting the ETHERNET Port directly to a PC (Crossover Cable) 14
7.6.2 Connecting the ETHERNET Port via a Network Hub (Straight-Through Cable) 16
7.6.3 Control Configuration via the Ethernet Port 16
8 Technical Specifications 16
9 Communication Parameters 17
10 Hex Table 17
11 Kramer Protocol 2000 18
Figures
Figure 1: VS-44H 4 x 4 HDMI Matrix Switcher Front and Rear Views 6
Figure 2: Connecting the VS-44H 4 x 4 HDMI Matrix Switcher 10
Figure 3: Local Area Connection Properties Window 15
Figure 4: Internet Protocol (TCP/IP) Properties Window 15
To Next Page
Loading...
Need help?
General
