Rev. Date: 12/27/17 Page 1
MODEL #1300/2300
INTRODUCTION
Thank you for purchasing a KRENDL INSULATION MOVING MACHINE. With over sixty years experience
in manufacturing insulation moving equipment, we have designed and built your machine with the highest
quality to provide years of reliable service.
This manual has been prepared to help you obtain the maximum efficiency and service from your Krendl
equipment. The machine is designed to condition and apply insulation with the utmost in dependable
performance. Our primary objective is to build equipment which will provide complete satisfaction so
that you may confidently recommend Krendl to others.
We do not manufacture or sell insulation. Our interest lies only in the proper performance of the equipment we
manufacture. We make no recommendations or guarantees concerning various insulations.
CAUTION:
This manual contains important information regarding the safe assembly and operation of your
machine. We urge you to read it carefully and follow the instructions provided. If your questions are not
answered in this manual, may we hear from you? We want you to be able to operate this unit safely
and confidently.
UNPACKING: Store and unpack carton with correct side up. Unpack your machine IMMEDIATELY and
check for damage in shipping. Place any damage claim with delivering carrier, saving all packing
materials for inspection. Our warranty covers manufacturer's defects only. DO NOT return to shipper.
FILL IN AND RETAIN:
Krendl Machine Company Telephone: 800-459-2069
1201 Spencerville Rd Fax: 419-695-9301
Delphos, Ohio 45833 U.S.A. E-mail: krendl@krendlmachine.com
Web Site:
www.krendlmachine.com
For your protection in the event of theft or loss, please fill in the information requested for your own
records. This information will be needed for in-warranty repairs. You may also want to attach a copy of
your invoice.
Machine model number _ Blower motor manufacturer _
Serial number _ Agitator motor manufacturer _
Blower(s) serial number(s) _ Speed reducer manufacturer _
Date of purchase _ Supplier _
The model and machine serial numbers are located on the hopper of the machine unit. The blower(s)
serial number(s) is located on the motor housing of the blower(s). The motor(s) serial number(s) is
located on the motor(s) housing and the reducer serial number is located on top of the reducer.
To Next Page
Loading...