Krendl 1300 - Parts List

Rev. Date: 12/27/17 Page 39
MODEL #1300/2300
MODEL #1300/2300
BASE UNIT and DRIVE ASSEMBLY
PARTS LIST
Item # Part # Description
1 23-3-R2-B Base, Complete
2 13-9 Agitator, Shredder, 1 1/4"
2-1 13-8 Agitator, Hopper, 1 1/4"
3 250503-8 Bearing, 1 1/4", 4-Bolt Flange (4)
4 250503-7 Seal, Felt, 1 1/4" (4)
5 5200-42 #50 Sprocket, 40T x 1 1/4" Bore (2)
6 1300-6 #50 Sprocket, 35T x 15T x 1 1/4" Bore (U.S.)
6 2050-6 #50 Sprocket, 40T x 18T x 1 1/4" Bore (Overseas)
7 S-50BS15-A #50 Sprocket, 15T x 1" Bore
8 150513 #50 Sprocket, Idler, 15T x 5/8" (3)
9 40052 Nut, 1" x 1 "x 1/2", Plated (2)
10 FSB120 Shoulder Bolt, 5/8" x 3/4" (3)
11 562 Key, 1/4" x 1/4" x 1 1/4" (4)
12 50NP-101 Chain, #50 x 101" (Uni-directional) (U.S. & Overseas)
12-1 50NP-2 Chain, #50 x 2" (Uni-directional to Center-Down) (U.S.) (Not Shown)
12-2 50NP-5 Chain, #50 x 5" (Uni-directional to Center-Down) (Overseas) (Not Shown)
13 109811 Chain, #50 x 37 1/2" (Airlock) (U.S.)
13 109801 Chain, #50 x 38 1/2" (Airlock) (Overseas)
14 23-3-1-3 Airlock Ramp, Model 1300
15 13-5-R2 Airlock, 3" in, 3" out, Model 1300
15 23-1-R1 Airlock, 3" in, 3" out, Model 2300
16 13-6 Shaft, Airlock, Model 1300
16 23-2 Shaft, Airlock, Model 2300
17 109031-8-ASSY Seal Assembly, (2 PLY/FAB) 12", Model 1300
17 209031-8-ASSY Seal Assembly, (2 PLY/FAB) 16", Model 2300
17-1 109031-9 Top Plate, 12", Model 1300
17-1 209031-9 Top Plate, 16", Model 2300
17-2 109031-8M-2PLYF Seal, Airlock (2PLY/FAB) 12", Model 1300
17-2 209031-8M-2PLYF Seal, Airlock (2 PLY/FAB) 16", Model 2300
17-3 109031-7 Base Plate, 12", Model 1300
17-3 209031-7 Base Plate, 16", Model 2300
18 517-7 Seal, Felt 1" Airlock (2)
19 517-6 Bearing, 1", 4-Bolt Flange (2)
20 13-7 Conversion Plate, Model 1300
21 13-4 Shredder box, Model 1300
21 23-4 Shredder box, Model 2300
22 13-2 Shredder Agitator, 7 Tine, Short, Model 1300
22 23-6 Shredder Agitator, 10 Tine, Short, Model 2300
23 13-3 Shredder Agitator, 6 Tine, Long, Model 1300
23 23-5 Shredder Agitator, 9 Tine, Long, Model 2300
24 426-7 Felt Seal, 3/4", Shredder Box (4)
25 426-6 Bearing, 3/4", 2-Bolt Flange (4)
26 S-50BS10 #50 Sprocket, 10T x 3/4" Bore (2)
27 448-1 Key, 3/16" x 3/16" x 1" (2)