Krendl 1300 - Page 43

Rev. Date: 12/27/17 Page 40
MODEL #1300/2300
MODEL #1300/2300
BASE UNIT and DRIVE ASSEMBLY
PARTS LIST
Item # Part # Description
28 250529-A Reducer, 28:1 (U.S.)
28 1300-10 Reducer, 26.74:1 (Overseas)
28-1 13-14 Spacer, Reducer (Overseas)
29 23-12 Motor Assembly, 2 HP 120v/60hz
29 25-13 Motor Assembly, 2 HP 240v/60hz
29 13-11 Motor Assembly, 2 HP 230v/50hz
30 23-7 Slidegate
31 23-8 Slidegate Crankrod
32 1300-9 Handle
32-1 1300-9-1 Mounting Rod, Slidegate Handle
33 FSB078 Cotter Pin, 1/8" x 1"
34 FN015 3/8-16 Lock Nut, Crimped
35 1300-1-R3 Hopper Extension
36 23-99 Latch, Pull (2)
38 23-10-R2 Side Gaurd (2)
39 7-13C Front Gaurd
40 ELU15-109068 ELU (120V, 60 Hz.) (double input 20 A & 30 A, double 14.5 A) Model #1300/2300
41 ELU15-109070 ELU (240V, 60 Hz.) (single input, double 14.5 A blowers) Model #1300/2300
41-1 ELU13-109071 ELU (240V, 60 Hz.) (single input 50 A (4) 14.5 A blowers) Model #1300/2300
42 ELU15-109083 ELU (230V, 50 Hz.) (double input, double 7 A blowers) Model #1300/2300
42-1 ELU15-109073 ELU (230V, 50 Hz.) (triple input, (4) 7 A blowers) Model #1300/2300
44 RC395-D RC Cord Assembly, 150', ELU, Style D
45 18-3 SJ Wire, #18-3 (SJ) x 150 feet
46 543-M-8 Plug, Style D (RC Cord)
47 RC395-DPDT RC Service Kit (DPDT)
47-1 RC395-1 Switch Housing, Remote Control
47-2 RC395-2 Switch Back Plate, Remote Control
47-3 RC395-3 Strain Relief, Remote Control
47-4 109066-9 Switch, Toggle (DPDT)
47-5 1536-7 Belt Clip
47-6 KMC-087 Decal, Feed Blower (Not Shown)
47-7 RC395-4 8-16 Plastite Screw (4) (Not Shown)