2 INSTALLATION
8
LT40 C/F
www.krohne.com 10/2021 - 4009051601 - AD UKEX LT40 R01 en
2.1.3 Electrostatic discharge
Do not install in a location where the electrostatic charge can increase. For example:
• locations near ventilation systems,
• locations where there is a risk of an increase in electrostatic charge caused by compressed
air and dust,
• locations near machines that use friction,
• locations near systems that apply electrons as a spray (e.g. near electrostatic painting
systems), and
• locations near other machines and systems that can have large electrostatic charges.
DANGER!
Risk of electrostatic discharge from the label and painted surfaces.
DANGER!
•
Make sure that the device and adjacent objects do not rub together.
•
Make sure that the device is correctly grounded.
•
If dirt collects on the device, clean it with a damp cloth.
ESD warning
Figure 2-1: ESD warning (on the device nameplate)
1 Text: Warning! Potential electrostatic hazard – see instructions
To Next Page
Loading...
