5958
The inner metal lid cannot be
removed:
• The ball lid is positioned incorrectly:
Unscrew the nut on the lid, remove the
inner part of the lid by pulling it towards
you, access the ball cover, correctly
reposition the lid.
COOK4ME TOUCH ERROR
CODES
There are several error codes:
• error 1 error communicating
with the keypad.
• error 2 error communicating
with the Wi-Fi.
• error 3 error communicating
with the power board.
• If the temperature sensor fails, the numbers
04, 05, 06, 07, 08, 09 are displayed on the
Cook4me Touch.
• error 10 heating error.
• error 11 pressure problem.
Unplug the Cook4me Touch.
Ensure that all elements of your
Cook4me Touch are in good condition.
If needed, clean the elements
of your Cook4me Touch following
the cleaning instructions.
Ensure that the valve cover
is correctly in place.
• error 13 excess pressure.
• error 14 low pressure due to
lack of water:
- add water to the bowl,
- resume cooking.
• error 15 decompression fault:
- unplug the Cook4me Touch,
- leave to cool,
- remove the metal lid,
- correctly position the ball cover.
• error 16 the Cook4me Touch doesn't build
up pressure:
- add water to the bowl,
- resume cooking.
• error 17 the Cook4me Touch pressure
fails to raise.
See page 55
"The Cook4me Touch pressure fails to
raise and steam is not being released
properly".
• error 18 failure to detect the locking rod.
• error 101, 106 display or recipe loading
error:
Unplug and restart the appliance.
If the problem persists, take your
appliance to an Approved Service
Centre.
For all problems, unplug the
Cook4me Touch.
If the problem persists, contact an
Approved Service Centre.
If you experience connection problems, visit
www.krups.de or
the Cook4me app.
To Next Page
Loading...
Need help?
General
