General information page 5
Use the original packaging to pack the instrument or accessories. If you no
longer have the original packaging, it must be ordered from KRÜSS at the
customer’s expense.
Pack all components separately which were packed separately when the unit
was supplied. Do not dispatch the unit in the assembled state.
If the instrument or accessories were provided with transportation locks, refit
these before shipping.
Use box-in-box packaging.
Our customer support department will be pleased to advise you regarding the
proper packaging.
SPAC S PA C S PAC SPAC
1.5 Reference to other manuals
The steps required for using the LabDesk software are described in the relevant
software manual.
SPAC S PA C S PAC SPAC
1.6 Technical customer service
If problems should occur when working with your KRÜSS product please consult
the technical customer support at KRÜSS GmbH. You can contact them at:
KRÜSS GmbH
Technical customer support
Tel: +49 040/514401-0
Fax: +49 040/514401-98
E-mail: info@kruss.de
SPAC S PA C S PAC SPAC
To Next Page
Loading...
