Need help?Do you have a question about the kruss M5000 and is the answer not in the manual?
General| Measuring principle | Oscillating U-tube |
|---|---|
| Density range | 0 to 3 g/cm³ |
| Temperature range | 10 to 40 °C |
| Density accuracy | ±0.001 g/cm³ |
| Density resolution | 0.0001 g/cm³ |
| Temperature resolution | 0.01 °C |
| Temperature control | Peltier |
| Power supply | 100 - 240 V, 50/60 Hz |
| Interfaces | USB, RS-232 |
| Interface | USB, RS-232 |
| Temperature accuracy | ± 0.03 °C |
Steps for preparing reference substances before calibration.
Detailed steps for calibrating the melting point meter.
Explanation of the initial display status upon device startup.
Instructions on how to select the desired target temperature for analysis.
Fundamental principles governing the start of melting point analysis.
Method for rapid heating to the target temperature.
To Next Page
