kruss Mobile Surface Analyzer User Manual

KRÜSS GmbH | Borsteler Chaussee 85 | 22453 Hamburg | Germany | www.kruss.de
Mobile Surface Analyzer – MSA
User Manual
V1-04
© KRÜSS GmbH, Hamburg 2014

kruss Mobile Surface Analyzer Specifications

General

Brand	kruss
Model	Mobile Surface Analyzer
Category	Measuring Instruments
Language	English

Summary

General information

1.1 General safety information

Covers essential safety precautions for operating the MSA, including protective gear and handling hazardous substances.

1.2 Intended use and application restrictions

Defines the specific applications of the MSA and lists restrictions on its use, such as environmental conditions.

1.3 Storage and transportation

Provides guidance on proper storage and transportation procedures for the instrument to prevent damage.

1.4 Scope of documentation and reference to other documents

Outlines the content of the manual and references related documentation for further information.

1.5 Technical customer support

Details how to contact KRÜSS technical customer support for assistance with product issues.

Controls

2.1 Overview

Provides a visual overview of the MSA's components and their locations on the device.

2.2 Measurement button

Explains the function of the measurement button and precautions for its use during operation.

2.3 Dosing unit

Describes the dosing unit, including available types and their specific characteristics.

2.4 Components on the underside

Details the components located on the underside of the MSA, including optics and outlets.

Filling cartridges for the pressurized dosing unit

Carrying out a measurement

4.1 Note for dosing and calibration

Important notes regarding liquid contact with optical components and maintaining position during measurements.

4.2 Connecting the MSA

Instructions on how to connect the MSA to a computer via USB for initialization and pressure build-up.

4.3 Creating a measurement in ADVANCE

Steps for initiating a new measurement within the ADVANCE software interface.

4.4 Calibration of the drop volume

Procedure for calibrating the drop volume to ensure accurate measurement results.

4.5 Carrying out a measurement

Details the process of performing an automated measurement after setup and calibration.

Using the optional syringe dosing unit

5.1 Notes on reconfiguration

Important precautions regarding electrostatic discharge when reconfiguring the MSA unit.

5.2 Changing the dosing unit

Step-by-step guide for safely removing and replacing the dosing unit on the MSA.

5.3 Filling the syringe dosing unit

Instructions on how to fill the syringe dosing unit with liquids for measurement.

Cleaning

6.1 Housing

Guidelines for cleaning the external housing of the MSA using damp cloths and rinsing agents.

6.2 Underside, prism and illumination

Specific cleaning instructions for the underside, prism, and illumination unit of the MSA.

6.3 Valve

Procedure for cleaning the MSA valve when dosing issues arise or drops are not dispensed.

6.4 Needle guide for the optional syringe dosing unit

Instructions for removing and cleaning the needle guide for the syringe dosing unit.

Appendix

I Technical data

Provides detailed technical specifications, dimensions, power, and interface information for the MSA.

II Computer requirements

Lists the minimum hardware and software requirements for running the ADVANCE software.

III Procedure if repairs should be necessary

Guidance on contacting support and procedures for sending the instrument for repair.

IV Warranty and caveat emptor

Details the warranty terms and conditions, including exclusions for misuse or unauthorized modifications.

V Copyright and right to make alterations

States the copyright information and the policy on altering the document's content.