Controls page 7
KRÜSS GmbH | Borsteler Chaussee 85 | 22453 Hamburg | Germany | www.kruss.de
2.4.3 Aperture
The rotatable aperture prevents flat drops from being over-illuminated. As standard, it is set to
an angle of approximately 45° for drops of 1 µL with contact angles of 30° and above.
If necessary, adjust the aperture with the help of the Allen key provided to optimize the drop
image for flatter drops.
2.4.4 Dosing outlet
The drops emerge from the dosing outlet and come into contact with the sample between the
illumination unit and the prism.
To Next Page
Loading...
