Using the optional syringe dosing unit page 14
KRÜSS GmbH | Borsteler Chaussee 85 | 22453 Hamburg | Germany | www.kruss.de
6. Remove the dosing unit. Fit the syringe dosing unit.
7. Carry out the assembly steps 2 to 5 in reverse.
5.3 Filling the syringe dosing unit
5.3.1 Opening the cover
If the instrument is connected, the plunger fitted moves upwards for removal when the cover of
the MSA is opened.
!
Only open the cover when the syringe head is to be filled or the liquid is to be changed.
After the cover has been closed, the electronics assumes that the syringe is full and moves
the plunger to the top position.
Fitted plunge
To Next Page
Loading...
Need help?
General
