Cleaning page 17
KRÜSS GmbH | Borsteler Chaussee 85 | 22453 Hamburg | Germany | www.kruss.de
5. Put the rod magnet parallel against the valve. Clean the valve by pressing the syringe
plunger.
The magnet opens the valve.
Alternately you can put the valve opened with the magnet in an ultrasonic bath.
6.4 Needle guide for the optional syringe dosing unit
The needle guide on the underside of the MSA can be removed for cleaning.
Insert the turning tool with the two pins supplied with the unit into the holes in the needle
guide. Unscrew the needle guide.
Clean the needle guide using a suitable solvent.
!
The needle guide is not resistant to acids.
Needle guide
To Next Page
Loading...
Need help?
General
