33
12. Maintenance / 13. Recovery and Recycling
13. Recovery and Recycling
The device can be an important source of raw materials. Please do not dispose of as
waste, but collect separateley for the recycling and recovery of the contained materials.
If disposed improperly, the materials may be damaging to the environment and human
health.
The manufacturer of the device, A.KRÜSS Optronic GmbH, collects, uses and recycles
the contained raw materials. However this recovery requires your support.
If you decide to dispose of this melting point meter, please do not try to open it up or
to use parts of it in any other way than described in this manual, but return the device
to the dealer you purchased it from.
The dealer should take the device back free of cost.
The recovery of the raw materials is effected with respect to the European guideline
2002/96/EC and any other applicable guideline.
12. Maintenance
Like all precision devices, your Melting point meter should be treated with care.
Protect it against dust, condensation, vibration and direct solar radiation.
Please do not apply acrid detergents to the instrument!
Important information!
In case of defect, the device must be repaired by
the company A.KRÜSS or an authorised workshop.
Important information!
Corrosive chemicals can harm the varnish or plastic
housing!
To Next Page
Loading...
Need help?
General
