Need help?Do you have a question about the KSB Etanorm SYT and is the answer not in the manual?
General| Drive | Electric motor |
|---|---|
| Pump type | Centrifugal pump |
| Application | Water supply, irrigation |
| Operating pressure | Up to 16 bar |
| Fluid temperature | Up to 120°C |
| Temperature range | -10 °C to +140 °C (depending on material and seal) |
| Casing material | Cast iron, stainless steel |
| Impeller material | Bronze, stainless steel |
| Shaft seal | Mechanical seal |
| Connection | Flange |
| Size range | DN 32 to DN 300 |
| Material | Cast iron, stainless steel, bronze |
To Next Page
