Need help?Do you have a question about the KSB Etaline and is the answer not in the manual?
General| Shaft Material | Stainless steel |
|---|---|
| Seal Type | Mechanical seal |
| Pump Type | Centrifugal |
| Pressure | Up to 16 bar |
| Material | Cast iron |
| Impeller Material | Bronze, stainless steel |
| Installation | Horizontal |
| Voltage | 690V (depending on model and region) |
| Frequency | 50/60 Hz |
| Housing Material | Cast iron |
| Connection Size | DN 32 to DN 200 |
General installation, operating, and maintenance instructions for safe operation.
Defines the correct application and operating limits for the pump.
Specifies requirements for personnel involved with the pump.
Details consequences of non-compliance with manual and associated risks.
Prohibits operation outside specified limits and warns of warranty voidance.
Information for operating in potentially explosive atmospheres.
Procedures and safety precautions for physically installing the pump set.
Instructions and safety measures for electrical hook-up.
Procedure to verify the correct rotation direction of the pump motor.
Prerequisites and steps for initial pump set start-up.
Procedures for safely shutting down the pump set.
Defines permissible operating parameters like temperature, pressure, and speed.
Measures for shutting down and storing the pump set.
Essential safety precautions for all maintenance activities.
Guidelines for routine checks and inspections of the pump.
Instructions and safety for disassembling the pump.
Instructions and safety for reassembling the pump.
A guide to diagnosing and fixing common pump problems.
To Next Page
