lares 4.0 Programming manual
R30024.130en 8
1.3.1 Keypad programming
Keyboard programming is limited to a few functions listed below.
Access the installer menu with a
PIN code (default: 123456)
. You can navigate the various items by pressing the keys once
you have entered the installer menu:
• ENTER: enter the sub-menu, confirm the values displayed or modified.
• ESC: exit the sub-menu, return to the previous menu, leave the installer menu.
• DOWN ARROW (SCROLL CLOCKWISE)/UP ARROW (SCROLL ANTICLOCKWISE): move from one item to another
within the same menu.
A list of some installer menu items:
• Sys. management: system management with the following items:
Reset alarm: all the alarms will be stopped, the tamper and alarm memories will be deleted.
Stop calls: all the communications, in progress and in queue, will be deleted (SMS, phone calls, email, etc.).
Freeze system: three possible choices:
▪ No freeze: normal activity.
▪ Freeze alarms: no action against the alarms will be performed.
▪ Freeze actions: freeze all the actions of control panel.
• User management: assign a RF-ID key to the users configured.
• Event logger: list of events occurred with details.
• Fault list: list of faults in progress.
• Zone status: view of the status of the zones configured in the system.
• Zone test: list of zones that were never been in alarm since the TEST started, useful during the installation
process.
• Installer data: installer data management
Change PIN: change installer PIN code.
Description: installer name.
Number: installer telephone number.
•
Update
:
it launches the software upgrade using the file present in the SD card and previously downloaded from
www.kseniasecurity.com, reserved area
.
Legend Description
1. Alphanumeric keypad with keys
from
1
to
9
,
*
and
#
2. ESC key
3. ENTER key
4. Scroll button for using:
4.1 Left arrow
4.2 Down arrow
4.3 Right arrow
4.4 Up arrow
5. Display LCD
6. RFID Area
7. Microphone
5.
6.
7.
4.4
1.
4.1 3 4.2
2.
To Next Page
Loading...
Need help?
General
