‐13‐
Load
Display the numerical value of the active
power(WATT) and apparent power(VA)
of the load. For example, as the
following graphics shown: the WATT of
the load is 1.1kw, VA is 1.9kVA (when
disconnect load, it is a normal
phenomenon to show a small numerical
value of WATT and VA).
Temperat
ure
Display the temperature of the inverter in
the UPS. As the following graphics
shown: the temperature of the inverter is
40℃.
Input
Display the voltage and frequency of the
input. As the following graphics shown:
the input voltage is 236v, input frequency
is 50.1Hz.
Battery
Display the voltage and capacity of the
battery. As the following graphics shown:
the battery voltage is 80.2v, the capacity
of battery is 100％(the capacity of
battery is approximately reckoned
according to the battery voltage). The
load segment 1 power shielding voltage
is 10.5VDC/per battery.
To Next Page
Loading...
