KStar 6kVA - 1.5.4 Rear panel instruction

- 13 -
 Parameter revise，see Fig.35～Fig.38
Fig.35 Parameter revise Fig.36 Parameter revise Fig.37 Parameter revise
Fig.38 Parameter revise
 Control operation see Fig.39～Fig.43
Fig.39：control menu Fig.40：control menu
Fig.41 Battery self-test Fig.42 stop battery testing Fig.43 Turn on/off delay
8） Warning message see Fig.44～Fig.49
Fig.44 no echo for setting Fig.45 error for setting Fig.46 switching delay
Setting
Revise
VinRevise 4096
InvRevise 4096
Setting
Revise
VoutRevise4096
+BusRevise 4096
Setting
Revise
NBatRevise4096
Command
Battery Test
Turn On Delay
Command
For: 1sec
Ent: sure
ESC: cancel
Command
Battery test
Turn Off Delay
STOP Testing
Ent: sure
ESC: cancel
Command
After: 1sec
Ent: sure
ESC: cancel
Warning!
Set no Echo:31
Warning!
Set Error:31
Warning!
Interrupt
switch prompt
Sure:Ent No:ESC
Setting
Revise
-BusRevise4096
PBatRevise 4096