- 23 -
3.4 UPS monitoring
Please refer to instruction of the UPS monitoring software provided.
3.5 LCD operation menu
3.5.1 Main menu switching
Pressing the left/right arrow and ENT button can switch among alarm info, running
parameter and function settings. Press ENT to enter alarm info, running parameters
or function settings. To enter function settings, double pressing on ENT is required.
3.5.2 Submenu switching
1) Press the arrow button can view the details after entering the running function
interface, and press ESC to return to main menu.
2) Press the arrow button can view the details after entering the function settings
interface, press the ESC to return to main menu
3) Parameter which has been selected and changed will be highlighted. Press
arrow button to change the value and press ENT to confirm it. Once confirmed,
it will not be highlighted.
4) Press the arrow button can view the detailed alarm info after entering the
alarm info interface, press the ESC to return to main menu
3.5.3 Priority of info displayed on LCD
1) If there is alarm but no valid operation on buttons, the alarm info with top
priority will be shown on LCD automatically
2) When there isn’t any alarm and the LCD is displaying the submenu of running
parameters, such as output current, these parameters will be always
displayed on the LCD if no further operation on buttons. If the LCD is not
displaying the submenu of running parameters, it will return to main menu in
30s as long as there isn’t any operation on buttons
To Next Page
Loading...
