KTM 1090 Adventure R - Installing the Crash Bar

13 SERVICE WORK ON THE CHASSIS
168
D03200-10
–
Remove screw
6
.
–
Remove screw
7
.
– Take off the right crash bar.
13.32 Installing the crash bar
D03200-11
– Position the right crash bar with the frame protector.
The tank holding rubber should be correctly positioned on
the fuel tank.
Info
Cover the components to protect them against damage.
–
Mount screw
1
but do not tighten yet.
Guideline
Remaining chassis
screws
M10 45 Nm (33.2 lbf ft)
–
Mount screw
2
but do not tighten yet.