CLEANING, CARE 20
261
– Treat the plastic parts and powder-coated parts with a mild
cleaning and care product.
Special cleaner for glossy and matte paint finishes, metal
and plastic surfaces ( p. 292)
– Oil the ignition/steering lock, tank lock, and seat lock.
Universal oil spray ( p. 292)
20.2 Checks and maintenance steps for winter operation
Info
If you use the motorcycle in winter, you must expect salt on the roads. You should therefore take precau-
tions against aggressive road salt.
If the vehicle was operated in road salt, clean it with cold water after riding. Warm water would enhance
the corrosive effects of salt.
To Next Page
Loading...
