KTM 1290 Super Duke R Setup Instructions

WORK 3
7
3.1 Removing the passenger seat
S03911-10
– Insert the RACE-ON key or the black ignition key into seat
lock
1
and turn clockwise.
– Lift passenger seat at the front and pull it out of the bracket
toward the front.
– Remove the passenger seat.
– Remove the ignition key.
3.2 Mounting the passenger seat
S03912-10
–
Hook recesses
1
of the passenger seat in guides
2
and
lower the front seat while pushing it back.
– Position the locking pin in the lock housing and push the pas-
senger seat down at the front.
The locking pin engages with an audible click.
– Check that the passenger seat is mounted correctly.
3.3 Removing the front rider's seat
Preparatory work
– Remove the passenger seat. ( p. 7)
S03913-10
Main work
–
Unlock the front rider's seat with loop
1
underneath the pas-
senger seat.
– Raise the front rider's seat at the rear and remove it.

KTM 1290 Super Duke R Specifications

General

Displacement	1301 cc
Transmission	6-speed
Seat Height	835 mm
Fuel Tank Capacity	16 liters
Dry Weight	189 kg
Starter	Electric starter
Fuel System	Electronic fuel injection
Traction Control	MTC (Motorcycle Traction Control), lean-angle sensitive
Wheelbase	1482 mm
Front Tire	120/70 ZR 17
Rear Tire	200/55 ZR 17
Engine Type	V-Twin, 4-stroke
Power	180 hp (132 kW) @ 9500 rpm
Torque	140 Nm
Frame	Chromium-Molybdenum steel frame, powder coated
Front Suspension	WP APEX 48
Rear Suspension	WP APEX monoshock
Rear Brake	Brembo two-piston caliper, 240 mm disc
Front Brake	Dual 320 mm discs, Brembo Stylema monobloc calipers
ABS	Bosch 9.1 MP (incl. Cornering-ABS and Supermoto mode)