How to fix speedometer in combination instrument not functioning in KTM Motorcycle?
If the speedometer in the combination instrument is not functioning on your KTM Motorcycle, the speedometer wiring harness may be damaged or the plug-in connector is oxidized. Check the wiring harness and plug-in connector.
General| Engine Type | Single-cylinder, 4-stroke |
|---|---|
| Bore x Stroke | 72 mm x 61.1 mm |
| Compression Ratio | 12.5:1 |
| Fuel System | Electronic Fuel Injection |
| Transmission | 6-speed |
| Cooling System | Liquid-cooled |
| Rear Suspension | WP monoshock |
| ABS | Optional |
| Seat Height | 820 mm |
| Dry Weight | 147 kg |
| Starter | Electric starter |
| Displacement | 248.8 cm³ |
| Torque | 24 Nm |
| Frame | Steel trellis frame, powder coated |
| Front Suspension | WP 43 mm USD forks |
| Front Brake | 300 mm disc |
| Rear Brake | 230 mm disc |
| Front Tire | 110/70 R17 |
| Rear Tire | 150/60 R17 |
| Wheelbase | 1340 mm |
| Fuel Capacity | 10.5 L |
Emphasizes reading the manual and paying attention to warning labels.
Explains danger, warning, caution, and note symbols with their meanings.
Provides safety instructions on alcohol, drugs, and hazardous exhaust gases.
Highlights the importance of wearing appropriate protective clothing.
Emphasizes correct service and maintenance for optimal operation and longevity.
Identifies the location of the clutch lever on the left handlebar.
Identifies the location of the hand brake lever on the right handlebar.
Explains various warning messages displayed on the instrument panel.
Provides essential advice and warnings for the first use of the motorcycle.
Provides guidelines and tips for the engine running-in phase.
Lists pre-ride checks and maintenance steps for ensuring roadworthiness.
Details the procedure and safety precautions for starting the engine.
Explains how to apply the brakes and related safety warnings.
Details the procedure and safety warnings for refueling the motorcycle.
Lists scheduled maintenance tasks and their intervals.
Explains the ABS unit, sensors, and its safety function.
Details how to check front and rear brake fluid levels and related warnings.
Explains how to check tire condition, tread depth, and air pressure.
Details how to check coolant levels and antifreeze, with warnings.
Details how to check the engine oil level.
Details the procedure for changing engine oil, filter, and cleaning oil screens.
Addresses issues with engine cranking, starting, and power.
Covers engine overheating, MIL, and ABS warning lamp issues.
Explains blink codes for engine diagnostic warning lamp (MIL).
Lists torque specifications for various engine components.
To Next Page