ELECTRICAL SYSTEM 130
B00639-11
To change the fuse of the ABS return pump:
– Take off the protection cap and remove fuse .
– Insert the new fuse.
Fuse (58011109130)
– Check that the ABS warning lamp still lights up.
– Mount the protection cap.
– Mount the seat. ( p. 84)
13.6Changing the fuses of individual power consumers
Warning
Fire hazard The electrical system can be overloaded if the wrong fuses are used.
– Use only fuses with the prescribed amperage. Never by-pass or repair fuses.
Info
The fuse box containing the fuses of individual power consumers is located under the seat.
– Switch off all power consumers and switch off the engine.
– Remove the seat. ( p. 83)
To Next Page
Loading...
Need help?
General
