SERVICE WORK ON THE CHASSIS 83
10.5Bleeding the fork legs
– Lean the motorcycle on the side stand.
B00621-10
– Remove bleeder screws briefly.
Any excess pressure escapes from the interior of the fork.
– Mount and tighten the bleeder screws.
Info
Carry out this operation on both fork legs.
10.6Removing the seat
600922-10
– Insert the ignition key in the seat lock and turn it clockwise.
– Raise the rear of the seat, push it towards the rear, and remove it upwards.
– Remove the ignition key from the seat lock.
To Next Page
Loading...
Need help?
General
