SERVICE SCHEDULE 70
K10N K75A K150A K300A
Clean the dust boots of the fork legs. • • •
Check the front brake fluid level. ( p. 101) • • • •
Bleed the fork legs. ( p. 83) • • •
Check the steering head bearing play. • • • •
Change the spark plugs. x
• •
Check the valve clearance. x
• •
Check all hoses (e.g. fuel, cooling, bleeding, drainage, ...) and sleeves for cracking, leaks, and
incorrect routing. x
• •
Check the antifreeze and coolant level. ( p. 153) • • • •
Check the wiring harness of the throttle valve body for damage and correct routing. x
• • •
Check the cables for damage and kink-free routing. x
• •
Check the control cables for damage, kink-free routing and adjustment. • • • •
Change the air filter. Clean the air filter box. x
• •
Check the fuel pressure. x
• • •
Check the value of the manifold absolute pressure sensor (PM value) with the KTM diagnostics
tool. x
• • •
Check the CO adjustment with the KTM diagnostics tool. x
• • •
Check/rectify the fluid level of the hydraulic clutch. ( p. 97) • • •
Check the fasteners for tightness. x
• • • •
Change the coolant. x
•
Change the front brake fluid. x
• •
Change the rear brake fluid. x
• •
Check the clutch. x
• •
To Next Page
Loading...
Need help?
General
