To Next PageTo Next Page
Need help?Do you have a question about the Kubler CODIX 560 and is the answer not in the manual?
General| Reset | Manual |
|---|---|
| Counting Speed | 1000 bills/min |
| Power Supply | 110/220 V, 50/60 Hz |
| Operating Temperature | 0 - 40 °C |
| Counting Speed (Bills) | 1000 bills/min |
| Hopper Capacity | 200 banknotes |
| Stacker Capacity | 200 banknotes |
| Functions | Counting, Batch, Add |
Mount the device away from heat sources and avoid direct contact with corrosive liquids, hot steam or similar.
Covers entering, selecting menus, parameters, and changing values.
Covers signal inputs, configuration, and presets for Tacho/Frequency Meter.
Covers timer output operations, configuration, and reset mode.
Details output signal configurations for Timer Presets 1 and 2.
Details signal inputs, output operations, and reset modes for Pulse Counter.
Covers timer signal inputs, output operations, configuration, reset, and presets.
Covers Teach Function and Teach-In with tracking presets.
Using the UP key or the DOWN key, select the preset to be changed.
Set pulse counter and timer to a value via Set function and MPI input.
