Table of Contents (German is the original version.)
1 Preface 4
2 Safety instructions and Warnings 4
2.1 Use according to the intended purpose 4
2.2 Mounting in a control panel 4
2.3 Electrical Installation 5
2.4 Cleaning and maintenance 5
3 Description 5
4 Display/Operating elements 6
5 Inputs 6
5.1 INP A, INP B 6
5.2 RESET 6
5.3 GATE 6
5.4 LOC.INP 6
5.5 MPI 1 / MPI 2 6
6 Outputs 6
6.1 Output 1 / Output 2 6
6.2 Active Outputs 6
7 Programming 6
7.1 Entering the programming 6
7.2 Selecting the main menus 7
7.3 Entering a sub-menu 7
7.4 Selecting the parameters 7
7.5 Changing parameter values 7
7.6 Setting count values 7
7.7 Ending the programming 7
7.8 Programming menu 7
7.8.1 Select language 7
7.8.2 Setting the Basic Function 8
7.8.3 Pulse Counter 8
7.8.4 Tacho/Frequency meter 10
7.8.5 Timer 11
8 Operation 15
8.1 Switching the display during operation 15
8.2 Setting the presets 15
8.2.1 Setting via front keys 15
8.2.2 Teach Function 16
8.2.3 Teach-In with tracking presets 16
8.3 Set Function 16
8.4 Default Parameters 16
8.4.1 Entry into the default setting 16
8.4.2 Selecting the parameter sets 16
8.4.3 Accepting the setting 16
8.4.4 Parameter Set Table 17
9 Error Message 17
10 Connections 17
10.1 Signal and Control Inputs 17
10.2 Supply Voltage and Outputs 17
11 Technical Data 17
11.1 General Data 17
11.2 Pulse Counter 17
11.3 Tacho/Frequency Meter 17
To Next Page
Loading...
