Kubota 05 Series Repair Manual

DIESEL ENGINE
05 SERIES WSM, 01640
W
P
I
D
U
l1790F00500
Injection Pump Pressure Tester
Application: Use to check fuel tightness of
injection pumps.
Pressure gauge full scale : More than
29.4 MPa
(300 kgf/cm2, 4267 psi)
Flange (Material : Steel)
Injection pipe
17
mm dia. 10.67 in. dia.)
8 mm dia. (0.31 In. dia.)
1 .O mm (0.039 in.)
17
mm dia. (0.67 in. dia.)
0.2402
to 0.2441 in, dla.
4 mm (0.16 In.)
0.4713 to 0.4721
In. dia.
23
mm (0.91 In.)
17 mm (0.67 in.)
12.00 to 12.02 mm dia.
0.4724
to 0.4732 in. dla.
100 mm (3.94 In.)
I a 1 Adhesive aoolication I
-~
I b I Fillet welding on the enter circumference I
7779060081 1
s-67
Redistribution or publication of this document, 
by any means, is strictly prohibited.

Kubota 05 Series Specifications

General

Brand	Kubota
Model	05 Series
Category	Engine
Language	English