DIESEL
ENGINE
05
SERIES
WSM,
01640
[I]
DRAINING WATER AND OIL
Draining Cooling Water and Engine Oil
A
CAUTION
0
Never remove radiator cap until cooling water temperature
is below its boiling point. Then loosen cap slightly to the
stop to relieve any excess pressure before removing cap
completely.
1.
Prepare a bucket. Open the drain cock
to
drain cooling water.
2.
Prepare an oil pan. Remove the drain plug to drain engine
oil
in
the pan.
01640S10290
[2]
EXTERNAL COMPONENTS
Air
Cleaner and Muffler
I,
Remove the air cleaner.
2. Remove muffler retaining nuts to remove the muffler.
(When reassembling)
Install the muffler gasket
sa
that its steel side face the muffler.
0
1640S10300
Alternator and Fan Belt
1.
Remove the alternator
(1).
2. Remove the fan belt
(2).
when reassembling)
0
Check
to
see that there are no cracks on the belt surface.
I
IMPORTANT
e
After reassembling the fan belt, be sure to adjust the fan
belt tension.
(1)
Alternator (2)
Fan
Belt
01640S10310
5-77
Redistribution or publication of this document,
by any means, is strictly prohibited.
To Next Page
Loading...
Need help?
General