Kubota 05 Series Repair Manual

TO THE READER
This Workshop Manual has been prepared to provide servicing personnel with
information on the mechanism, service and maintenance of
KUBOTA Diesel Engines 05
SERIES. It is divided into two parts, “Mechanism” and “Disassembling and Servicing” for
each section.
Mechanism
Information on the construction and function are included for each engine section. This
part should be understood before proceeding with troubleshooting, disassembling and
servicing.
H Disassembling and Servicing
Under the heading ”General” section comes general precautions, troubleshooting, lists
of servicing specifications and periodic inspection items. For each engine section, there
are “Checking and Adjustment“, “Disassembling and Assembling”, and “Servicing” which
cover procedures, precautions, factory specification and allowable limits.
All the engines that have been manufactures since January of 1994 are clean exhaust
The mark [E] in the WSM refers to the said clean engine.
engines.
All information, illustrations and specifications contained in this manual are based on
The right is reserved to make changes in all information
at any time without notice.
Due to covering many models of this manual, illustration or picture being used have not
the latest production information available at the time of publication.
been specified as one model.
@ KUBOTA Corporation 1996
May 1996
01640200040
Redistribution or publication of this document, 
by any means, is strictly prohibited.

Kubota 05 Series Specifications

General

Brand	Kubota
Model	05 Series
Category	Engine
Language	English