EasyManua.ls Logo

Kubota F2880 - Page 49

Kubota F2880
75 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
29MAINTENANCE
A With the emission control now in effect, the CF-4 and CG-4 lubricating oils have been developed for use of a low-
sulfur fuel on on-road vehicle engines. When an off-road vehicle engine runs on a high-sulfur fuel, it is advisable to
employ the CF, CD or CE lubricating oil with a high total base number. If the CF-4 or CG-4 lubricating oil is used
with a high-sulfur fuel, change the lubricating oil at shorter intervals.
A Lubricating oil recommended when a low-sulfur or high-sulfur fuel is employed.
A Transmission oil (KUBOTA SUPER UDT *1):
KUBOTA Original Transmission hydraulic fluid
The oil used to lubricate the transmission is also used as hydraulic fluid. To insure proper operation of the hydraulic
system and complete lubrication of the transmission, it is important that a multi-grade transmission fluid be used in this
system. We recommend the use of KUBOTA UDT or SUPER UDT fluid for optimum protection and performance.
(Consult your local KUBOTA Dealer for further detail.)
Do not mix different brands together.
A Indicated capacity of water and oil are manufacture's estimate.
: Recommendable X: Not Recommendable
Lubricating
oil class
Fuel
Remark
Low-sulfur High-sulfur
CF TBN 10
CF-4 X
CG-4 X

Table of Contents

Other manuals for Kubota F2880

Related product manuals