Kubota GR2000 User Manual

• Ballast
A CAUTION
To avoid personal injury:
• Additional ballast will be needed for operating
heavy attachments. When the attachment
is
raised, drive slowly over rough ground,
regardless
of how much ballast is used.
• Add front ballast to increase front end stability
and help prevent possible front end tip up.
• Always back up when going up a slope. Driving
forward
could cause the machine to tip over
backward. Stay off hills and slopes too steep
for safe operation.
Front ballast is added for stability and steering control
when heavy rear mounted equipment such as the rotary
tiller is installed.
Front ballast also compensates for weight transferred to
the rear
wheels by the draft of towed implements through
the hitch.
Add additional front
ballast, if necessary, for stability and
safety during transport
of heavy rear mounted equipment.
Front end
ballast may not always maintain the required
stability if the machine
is driven too fast over rough ground
with heavy rear mounted equipment
in the raised position.
Use care and drive
slowly under these conditions.
Limit
ballast to machine operating capacity. Be sure to
remove
ballast when it is not needed.
Add
ballast to rear end if needed for stability. Heavy front
mounted attachments tend to
lift rear wheels. Add enough
ballast to maintain steering control and prevent tipover.
The Attachment's Manual shows how much rear
ballast is
required for your application. Rear ballast are available
from your KUBOTA Dealer.
IMPLEMENT LIMITATIONS 5

Kubota GR2000 Specifications

General

Brand	Kubota
Model	GR2000
Category	Lawn Mower
Language	English