EasyManua.ls Logo

Kubota GR2000 - Hourmeter; Parking; Parking Brake Pedal

Kubota GR2000
92 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
22 OPERATING THE MACHINE
Hourmeter
The hourmeter indicates
in
five digits the hours the
machine has been used; the
last digit indicates 1/10
of
an
hour.
NOTE:
As the hour meter works electrically, it starts to work
when the key switch
is
turned to "ON", regardless
of
the engine running or not.
(1)
Hours used
PARKING
.Parking
A CAUTION
To avoid personal injury:
Before leaving the operator's position:
Apply parking brake.
Lower all implements to the ground.
Shut off the engine.
Remove the key.
1.
When parking, be sure to set the parking brake.
To apply the parking brake;
Depress the brake pedal firmly with your right foot and
the parking brake
pedal simultaneously with your left
foot. Then release the brake pedal while holding the
parking brake
pedal down.
2.
Before getting off the machine, disengage the PTO,
lower all implements
to the ground, place all control
levers
in
their neutral positions, set the parking brake,
stop the engine and remove the key.
3.
If it is necessary to park
on
an
incline, be sure to chock
the
wheels to prevent accidental rolling
of
the
machine.
1 BDAHADAP049A
(1)
Chocks

Table of Contents

Related product manuals