Kubota GR2000 User Manual

18 OPERATING THE MACHINE
STARTING
1. Adjusting the operator's position
• Seat
A CAUTION
To avoid personal injury:
• Make sure that the seat is completely secured
after each adjustment.
• Do not allow any person other than the
operator
to ride on the machine.
The operator's seat position can be adjusted forward and
backward by 175
mm (6.9 in.) range by pulling the seat
sliding lever.
(1) Seat sliding lever
IMPORTANT:
•
After adjusting the operator's seat, be sure to check
that the seat
is properly locked.
2. Selecting Light Switch Positions
.Head Light Switch
(A) ...... Head lights ON .
(B) ...... Head
lights OFF.
®
®
1 BDAHADAP048C
(1) Head light switch
3. Raise the implement.
• Hydraulic Lift Lever
The hydraulic lift lever is used to raise and lower
implement
used with the machine (ex. Mower).
To
lower implement, push the lever FORWARD.
To raise
it, pull the lever BACKWARD.
(1) Hydraulic lift lever
IMPORTANT:
~:"DOWN"
N:NEUTRAL
~:"UP"
• Do not operate until the engine is warmed up. If
operation is attempted when the engine is still cold, the
hydraulic system may be damaged.
• Do not operate at slow Engine rpm. Move the throttle
lever
above 1/2.

Kubota GR2000 Specifications

General

Brand	Kubota
Model	GR2000
Category	Lawn Mower
Language	English