12 OPERATING THE ENGINE
4.
Set
the
throttle
lever
1/2
way
forward.
(1)
Throttle lever
~:
"FAST"
___
: "SLOW"
I)
®i;
V
®..--
5.
Insert
the
key
into
the key
switch
and
turn
clockwise
one
notch.
Make
sure
the
easy
checker
lights
are
ON.
• Key
Switch
[GR2000]
e OFF ........... .
The position where the key can
be
inserted into or removed from the
key switch. [When the key
is
turned
this position, the engine shuts off.]
ON.............. The engine keeps running.
START........
Apply the parking brake and turn the
key switch to this position to start the
engine.
[GR2000]
1 BDAHADAPOO2A
e:"OFF"
©:"ON"
IMPORTANT:
6: "START"
• Do not use starting fluid or ether.
• To protect the battery and the starter, make sure that
the starter
is
not continuously turned for more than 1 0
seconds at a time.
If the engine does not start, allow 60 seconds cool
down period between starting attempts.
• If the starter does not turn the engine over, shut off the
starter
immediately.
Do
not make further attempts to
start the engine
until the condition
is
corrected. Do not
jump start using another battery.
Consult your local KUBOTA dealer.
•
Do not turn the key switch to the "START" position
while the engine
is
running.
• When the temperature
is
below 0
°C
(32
OF),
run the
engine at medium speed to warm
up
the lubricant of
the engine and the transmission for at
least
10
minutes. If the machine
is
operated before the
lubricant
is
warm enough, the machine life will
be
shortened.
• Do not operate the machine under full load until it
is
sufficiently warmed
up
2 or 3 minutes for temperature
above
0
°C
(32
OF
).
• When the ambient temperature
is
less than -15°C
(5
OF
),
remove the battery from the machine and store
it somewhere warm
until the next operation.
To Next Page
Loading...
Need help?
General
