1 BDAHADAP069A
1 BDAHADAP062C
ANTI-SCALP
ROLLER
SETTING
Adjust
the
anti-scalp
rollers'
height
as
shown
below.
(1)
Hydraulic lift lever
(2)
Cutting height control dial
5.
Lower the mower deck by lifting the lever, pushing
in
the release button and lowering the lever while holding
in
the release button. This lowers the mower deck from
the "Transport" position to the
"Operating" position.
6.
Use the higher settings for mowing
in
a rough area or
when mowing
tall grass. Lower settings should be
used
only for smooth lawns where short grass
is
desired.
1 BDAHADAP050A
(1)
Anti-scalp roller
OPERATING THE MOWER 25
1 BDAHADAP083A
(1)
Anti-scalp roller (Rear)
To Next Page
Loading...
