28 OPERATING THE MOWER
NOTE:
(1) The K.R.A. System Override Mode can not
be
activated by pushing the switch while the speed
control pedal
is
depressed to initiate rearward
movement.
(2) The override switch
light flashes while activated
as
a reminder to the operator that PTO (i.e. mower,
tiller, etc.) remains engaged during reverse travel.
(3) The
K.RA
System Override Mode will remain
activated
until the PTO lever
is
returned to the
"DISENGAGED" position.
(4) To prevent use
of
the K.R.A. System Override
Mode, remove the fuse
located under the seat:
• The engine can
be
started.
• The machine PTO can be engaged if the speed
control pedal
is
in
the neutral or forward position.
• Selection
of
PTO operation (i.e. mower. tiller
etc.) during reverse travel
is
not possible.
(1)
Fuse
A WARNING
To avoid
serious
injury
or
death:
• Engine
components
can
get
extremely
hot
from
operation. To prevent severe burns,
do
not
touch
these areas
while
the engine
is
running,
or
immediately after
it
is
turned off.
Never operate the engine
with
heat
shields
or
guards
removed.
To Next Page
Loading...
Need help?
General
