MAINTENANCE 37
IMPORTANT:
• To prevent serious damage to hydraulic systems, use only KUBOTA genuine fluid or its equivalent.
NOTE:
• Engine Oil:
• Oil
used
in
the engine should have
an
American Petroleum Institute (API) service classification and Proper SAE
Engine Oil according to the ambient temperatures
as
shown above.
• With the emission control now
in
effect, the CF-4 and CG-4 lubricating oils have been developed for use of a low-
sulfur fuel
on
on-road vehicle engines. When
an
off-road vehicle engine runs
on
a high-sulfur fuel, it
is
advisable to
employ the CF,
CD
or
CE
lubricating oil with a high total base number. If the CF-4 or CG-4 lubricating oil
is
used
with a high-sulfur fuel, change the lubricating oil at shorter intervals.
• Lubricating oil recommended when a low-sulfur or high-sulfur fuel
is
employed.
0:
Recommendable
X:
Not Recommendable
Lubricating
Fuel
Remark
oil class
Low-sulfur High-sulfur
CF
0 0
TBN
~
10
CF-4
0
X
CG-4
0
X
• Transmission oil (KUBOTA SUPER UDT *1):
KUBOTA
Original Transmission hydraulic fluid
The oil used to lubricate the transmission
is
also used as hydraulic fluid. To insure proper operation of the hydraulic
system
and
complete lubrication of the transmission, it
is
important that a multi-grade transmission fluid
be
used
in
this
system. We recommend the use of
KUBOTA UOT or SUPER UOT fluid for optimum protection
and
performance.
(Consul,! your local KUBOTA Dealer for further detail.)
Do
not mix different brands together.
• Indicated capacity of water and oil are manufacturer's estimate.
To Next Page
Loading...
Need help?
General
