REGULAR CHECKS AND MAINTENANCE WORK86
(3) Oil change according to operating hours.
BChecking Engine Valve Clearance
Consult your local KUBOTA dealer for this service.
EVERY 1000 SERVICE HOURS OR ONCE A
YEAR
BReplacing Air Filter Element
Open the engine hood and remove the dust-cover.
Remove and replace the outer element and inner element
with new elements.
When reassembling, install the dust-cover so that its TOP
mark (arrow) faces up-wards.
A Shorten the replacement period if the machine is used
in dusty or sandy areas.
EVERY 1500 SERVICE HOURS
Do all 50, 100, 250 and 500 hour servicing at the same
time.
BChecking Injector Tip
Consult your local KUBOTA dealer for this service.
BReplacing Oil Separator Element
To avoid personal injury or death:
A Be sure to stop the engine before replacing the
oil separator element.
1. Remove the cover and take out the element. Wipe off
oil and the carbon in the case with a clean rag.
2. Fit a new oil separator element and O ring.
3. Tighten the cover until a cover comes in contact with
body.
Hydraulic oil Return filter cartridge
Normal
excavator
work
every 1000
Hrs.
every 500 Hrs.
(250 Hrs. after first
operation)
Hammer
work
portion
20% every 800 Hrs.
every 200 Hrs.
40% every 400 Hrs.
60% every 300 Hrs.
every 100 Hrs.
more every 200 Hrs.
(1) Inner element
(2) Outer element
(3) Dust-cover
(4) Clamps
(1) Oil separator
(1) Body
(2) Oil separator element
(3) O ring
(4) Cover
To Next Page
Loading...
