19OPERATING THE ENGINE
BRegeneration Operating Procedure
1. Start the engine and make sure that the auto regeneration switch lamp is "OFF".
Operating Procedure for Inhibit Mode
(1) Auto regeneration switch
(2) Parked regeneration switch
(3) Regeneration indicator
(4) Engine RPM increase indicator
(5) Engine warning indicator
(6) Parked regeneration indicator
Switch lamp OFF: Inhibit Mode selected.
Switch lamp ON: Auto Mode selected.
2. When the parked regeneration indicator starts flashing, follow the "Operating Procedure for Parked
Regeneration" procedure.
To Next Page
Loading...
Need help?
General
